You will need to know then when you get a new router, or when you reset your router. Download and install the sadp tool in your computer and just open it up to start the hikvision ip camera configuration process. Enter internet options > security, uncheck enable protected mode, and restart the internet explorer to try.
Unveiling Europe A Comprehensive Guide To LargeScale Maps Texas
Your default ip address will be 192.0.0.64. Activation encoder default ip address is 192.0.0.64 login th. You should activate the device before the first login.
In the sadp interface, note the default ip.
With this guide you can activate encoder, change ip address and add it to mirasys vms. The default ip address of the camera is 192.168.1.64. Here’s a video with a quick explanation about the hikvision. If your ip camera is correctly connected to your network it might.
Open a web browser and input the default ip address. You cannot access the system due to the internet explorer's security settings. The default ip address for the hikvision ip camera is 192.0.0.64, and you may change it to meet your local network subnet range. Change the ip address of your pc to the same subnet as the camera.
Activation via the device, sadp tool and the client software.
In order to activate your hikvision ip camera, you will need to access its configuration settings: Find the default login, username, password, and ip address for your hikvision router. After powering on the device, the system will switch to device activation page. The previous versions of hikvision cameras required you to enter 'admin' as your default username and '12345' as your default passphrase
